The compact version of a puncture kit, sized for a glovebox.
This is the repair that gets a tubeless tyre holding air again in about five minutes, without taking the wheel off. Ream the hole, push the plug through, trim it flush and reinflate. It is the same technique a tyre shop uses for a tread puncture, in a case small enough to keep in the car permanently.
- Repairs a tread puncture with the wheel still on the car
- T-handle reamer and needle, so you can push a plug in by hand
- Sticky rope plugs that expand to seal as they compress
- No jack and no wheel removal on a roadside or hard shoulder
- Hard case keeps the tools together and the rubber clean
For tubeless car and van tyres. Tread repairs only, not sidewalls.
Five minutes of work instead of a two-hour wait for recovery.
